USB Extender 2.0 capable of realizing an installation via a Cat.5e/6/7 network cable (in copper and of excellent quality) with a transmission distance of 100m for Cat.5e and 150m for Cat.6 and higher via dedicated switch. Supports 4 USB2.0 inputs to connect printers, cameras, scanners, USB drives, keyboards, mice, touchscreens, etc. and supports cascading gigabit switches.
Features- USB 2.0 High-Speed 4 port extender with transmitter and receiver
- It allows to realize a one-to-one connection through a network cable Cat. 5 and/ 6 / 7 , with a transmission distance up to 100 m for Cat. 5 and and 150 m for Cat. 6 and higher with dedicated switch
- Supports relay switch, signal transmission distance can & grave; be increased using an independent Gigabit switch that is not connected to the network
- Supports hot connection of USB devices and automatically identifies high-speed USBà, full speedà and low speedà
- Supports USB 2.0 devices up to 480 Mbps; USB 1.1 /USB 1.0 compatible backword
- Supports 4 2.0 USB inputs and 1 2.0 USB output
- The è transmitter powered by the source device, does not require any additional power
Protection- Protection against lightning
- Overload protection
- ESD protection
Technical specifications- Compatibilityà: USB 2.0, USB 1.1, USB 1.0
- Velocità transmission: compatible with High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps)
- Transmission distance: CAT 5 E≤ 100 m; CAT 6 / 6 A/ 7 ≤ 150 m with dedicated switch
- Supported USB Hot-Plug
- Connections: 4 USB-A ports in input; 1 USB-A port in output
- Standard: Cat. 5 e/ 6 / 6 A/ 7 standard EIA/TIA 568 B
- Power supply: TX: Powered by the source; RX: DC 5 V/ 1 A
- Consumption: TX ≤ 2 W; RX≤ 2 W
Operating systems- Windows
- Mac OS
- Linux
- Android
Dimensions- Width: 76 mm
- Depthà: 60 mm
- Height: 21 mm
- Weight: TX 123 g; RX 128 g
Environmental features- Operating temperature: from - 20 ° ~ 60 °C
- Storage temperature: from - 30 ° ~ 70 °C
- Humidità: 0 ~ 90 % (without condensation)
CertificationsPackage contents- 1 x Transmitter
- 1 x Receiver
- 1 x DC power supply 5 V/ 1 A
- 1 x USB cable
- 1x User manual
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent