· Provides power and data connection for up to eight PoE network devices
· Saves time and money by providing data and power over an existing wired network
· Self-Healing Network: the Powered Device Monitor (PDM) function restarts any connected PoE device that is not responding or not sending network traffic
· Compatible with Domotz for cloud management (may require firmware update)
· For desktop use or standard 19 rack installation
· Auto-detection of port speed 10/100/1000 Mbps
· Two slots for GBIC (SFP) modules
· Compatible with IEEE 802.3at/af RJ45 PoE/PoE+ on the output ports
· Output power up to 30 Watts per port*
· PoE power up to a maximum of 140 watts
· PoE surge protection (4kV) for all RJ45 ports
· Switch 20 Gbps
· Supports devices compatible with IEEE 802.3at and IEEE 802.3af (wireless access points, VoIP phones, IP cameras, etc.)
· Energy-saving technology allows disabling unused ports and adjusting power levels according to cable length
· Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE)
· IEEE 802.3az (Energy Efficient Ethernet EEE) can be disabled
· Supports IEEE 802.3at/af detection and short circuit, overload and high voltage protection
· All RJ45 ports support Auto-MDIX (auto uplink)
· Configuration via web browser, Telnet or SSH
· Remote reboot/restart
· Supports SNMP Management
· Supports SNMP Management
· IGMP Snooping for multicast filtering
· SNMP V1, V2C, V3 with RMON groups 1, 2, 3 and 9
· Supports VLAN (tag-based and port-based)
· Supports link aggregation (trunking)
· Supports port mirroring
· QoS bandwidth management (Quality of Service)
· Broadcast storm control with multicast packet rate settings
· Store and forward switching architecture
· Supports jumbo frames up to 9 kByte
· Supports Rapid Spanning Tree / Spanning Tree protocol
· IEEE 802.3x flow control for full duplex
· Supports 8k MAC address entries
· Memory buffer of 512 kBytes
· High-efficiency fan provides quiet and reliable cooling
· Desktop metal case
· Includes 19 rack mount brackets
· Fully NDAA compliant
Standard
· IEEE 802.1d (Spanning Tree Protocol)
· IEEE 802.1p (Traffic prioritization)
· IEEE 802.1q (VLAN tagging)
· IEEE 802.1s (Multiple Spanning Tree Protocol)
· IEEE 802.1w (Rapid Spanning Tree Protocol)
· IEEE 802.3ad (Link aggregation)
· IEEE 802.3 (10Base-T Ethernet)
· IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
· IEEE 802.3ad (Link Aggregation Control Protocol LACP)
· IEEE 802.3af (Power over Ethernet 802.3at Type 1)
· IEEE 802.3at (Power over Ethernet 802.3at Type 2)
· IEEE 802.3az (Energy Efficient Ethernet EEE)
· IEEE 802.3u (100Base-TX Fast Ethernet)
· IEEE 802.3x (flow control, for full duplex mode)
General information:
· Ports
- Eight 10/100/1000 Mbps RJ45 PoE ports
- Two Gigabit SFP slots
- One console port
· MAC address: 8192
· Memory buffer: 512 kBytes
· Backplane speed: 20 Gbps
· Switch architecture: store and forward
· Packet peak rate: 14.88 Mbps
· MTBF: 259,692 hours
· Ventilation
- One fan
- Noise level: 23.5 dB (A) (max.)
· Smart configuration options:
- Authentication 802.1x
- ACL Access Control list
- Broadcast Storm control with transmission rate, multicast, and unicast
- Cable diagnostics
- DHCP with option 82
- IGMP snooping via command line
- Port link speed: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation
- Flow control on/off per port
- LAN configuration (IP address, DHCP, Gateway, etc.)
- MAC address management, learning & aging, MAC filter
- Ping utility
- Port mirroring, 1-1 or many-to-one
- Port aggregation / LACP: 8 groups
- Quality of Service (QoS)
- Link Layer Discovery Protocol (LLDP) - Station and Media Access Control Connectivity Discovery
- Radius server via command line
- Rate limitation (ingress rate and egress rate)
- RMON groups (statistics, history, alarms and events)
- SNMPv1 / v2c / v3 (Simple Network Management Protocol)
- Spanning tree (STP, RSTP, MSTP)
- TACAS+ via command line
- Tracert utility program
- VLAN
· PoE management features
- PoE on/off per port
- Supported PoE mode per port: AF & AT / AF
- Maximum power per port
- PoE priority per port: low, medium, high
- PoE SNMP alarm notification
- PoE delayed start configuration for each port
- PoE restart time configuration per port
- PoE status monitoring
· Pinout of RJ45 output ports (data + power)
- IEEE Alternative A
- Pin 1: Rx+ (data receive) + Vdc_return (+) (feeding power [+])
- Pin 2: Rx- (data receive) + Vdc_return (+) (feeding power [+])
- Pin 3: Tx+ (data transmit) + Vdc (feeding power [-])
- Pin 6: Tx- (data transmit) + Vdc (feeding power [-])
· Certifications: FCC Class A, CE
LED
· PoE
· Power supply
· Activity/Link
Power
· Input: 100 – 240 V AC, 50 – 60 Hz
· Power consumption: 163,2 Watts (maximum)
General information
· Metal chassis
· Dimensions: 280 (D) x 180 (W) x 44 (H) [mm]
· Weight: 1.6 kg
· Operating temperature: 0 – 45°C
· Operating humidity: 10 – 90% RH, non-condensing
· Storage temperature: -10°C - 70°C
Package contents
· 8-port Gigabit Ethernet PoE+ Web-Managed switch with 2 SFP ports
· Rack mounting brackets 19
· Power cable
· Instructions
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent