I-SWHUB IND-719 (IGS-1050A) is an Unmanaged Gigabit Ethernet switch with 5 10/100/1000Base-T(X) ports. It supports redundant power input, IP-30 rated housing, and a DIP switch to enable or disable relay alarm output. Additionally, the wide operating temperature range from -40 to 70°C can meet most environmental operating conditions.
Features- Each unit supports 5 x 10/100/1000Base-T(X) ports
- Supports Jumbo Frame up to 9K Bytes
- Hardware DIP switch to enable/disable alarm function
- Design with rugged IP-30 slim housing
- DIN rail and wall mounting capability
Specifications- Ports: 5 10/100/1000Base-T(X) RJ 45 Auto MDI/MDIX
- Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3z for 1000Base-X; IEEE 802.3ab for 1000Base-T; IEEE 802.3x for Flow control
- MAC Table: 1024 MAC addresses
- Processing: Store-and-Forward
- Jumbo frame: 9K
- LED Indicators: Power = Green, Power LED x 2; Fault indicator = Amber: indicates that an error has occurred on PWR1 or PWR2; Port indicator 10/100/1000Base-T(X) RJ45 = Green for port Link/Act, Amber for 100Mbps
- Redundant power input: dual DC input, 12-48 VDC on 6-pin terminal block
- Power consumption: 5.5 W
- Overload protection: present
- Reverse polarity protection: present
- Enclosure protection rating: IP30
- Storage temperature: -40 to 85°C
- Operating temperature: -40 to 70°C
- Operating humidity: 5% to 95% non-condensing
- Dimensions (LxWxH): 26.1 x 94.9 x 144.3 mm
- Weight: 420g
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent