The Cat. 7 S/FTP cable from inside/outside è characterized by the construction of the cable 4 x 2 xAWG 23 / 1 and reaches a frequency of transmission up to 1200 MHz. It has an outer sheath in PE and an inner sheath free of halogens and è conform to the standard IEC 60332 - 1 and to the Regulation on construction products (BauPVO) Euroclass Dca.
The è cable is suitable for installation in dry or humid environments, outdoor or underground. It complies with ISO/IEC 11801 , DIN EN 50173 , DIN EN 50288 - 4 .
Features- UV-resistant
- Bending radius (dynamic) 8 x OD
- Bending radius (static) 7 x OD
- Shielding class: S/FTP (PiMF)
- Specification: CAT 7
- Cable length: 250 m
- Conductor category Class 1 : rigid
- Internal conductor material: copper
- AWG: 23 / 1
- Conductor diameter: 0.56 mm
- Outer sheath material: PE + LSZH
- Flame retardant: acc. EN 60332 - 1 ;acc. IEC 60754 - 2 ;acc. IEC 61034
- Without halogens: EN 60754 - 1 / 2 ;acc. EN 60754
- Low smoke emission: EN 61034
- impedance: 100 ± 15 Ohm
- Maximum frequency: 1200 MHz
- Transmission standard: IEEE 802.3 10 Mbit to 10 Gbit
- Cable: EN 50288 - 4 - 1 ;IEC 61156 - 5
- CPR (EU 305 / 2011) class DCA - EN 50575 : 2014 +A 1 : 2016
Environmental features- Operating temperature: - 20 - 70 °C
- Operating temperature: 0 - 50 °C
CertificationsPackage contents- ITP 10 cable coil - PIMF- 0250 PE
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent