Switch 24 PoE ports Web-Managed Gigabit Ethernet 2 SFP - Intellinet I-SWHUB 24GP

• Provides power and data connection for up to 24 PoE network devices
  
  
• Saves installation costs by delivering data and power over existing network cables
  
  
• Self-Healing Network: The Powered Device Monitor (PDM) function restarts any connected PoE device that is not responding or not sending network traffic
  
  
• Automatic speed detection of ports 10/100/1000 Mbps
  
  
• Two slot compartments for GBIC (SFP) modules
  
  
• Compatible with IEEE 802.3at/af RJ45 PoE/PoE+ on output ports
  
  
• Output power up to 30 Watt per port (See Manual)*
  
  
• PoE power of 240 Watt
  
  
• Supports IEEE 802.3at and IEEE 802.3af compatible devices (wireless access points, VoIP phones, IP cameras)
  
  
• Supports IEEE 802.3at/af detection and short circuit, overload and high voltage protection
  
  
• All RJ45 ports have Auto-MDIX and NWay auto-negotiation support
  
  
• Configuration via web
  
  
• Supports SNMP Management
  
  
• Supports VLAN (tag-based and port-based)
  
  
• Provides IEEE 802.1x security protocol
  
  
• Supports link aggregation (trunking)
  
  
• Supports per-port bandwidth control
  
  
• Supports port mirroring
  
  
• Supports two types of QoS: port-based and DSCP
  
  
• Broadcast storm control with multicast packet rate settings
  
  
• Supports jumbo frames up to 9 kBytes
  
  
• Supports IEEE 802.3x flow control on full duplex and backpressure on half duplex
  
  
• Switch architecture: store and forward
  
  
• Operates in full/half duplex mode
  
  
• IEEE 802.3x flow control for full duplex mode
  
  
• Supports 8k MAC addresses
  
  
• Buffer memory of 400 kBytes
  
  
• LEDs for power, link/activity, and PoE
  
  
• Two high-volume cooling fans ensure perfect ventilation
  
  
• Includes 19 rack mounting brackets
  
  

Standard

• IEEE 802.1d (Spanning Tree Protocol)
  
  
• IEEE 802.1p (Traffic Prioritization)
  
  
• IEEE 802.1q (VLAN Tagging)
  
  
• IEEE 802.1w (Rapid Spanning Tree Protocol)
  
  
• IEEE 802.3ad (Link Aggregation)
  
  
• IEEE 802.3 (10Base-T Ethernet)
  
  
• IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
  
  
• IEEE 802.3ad (Link Aggregation Control Protocol LACP)
  
  
• IEEE 802.3af (Power over Ethernet 802.3at Type 1)
  
  
• IEEE 802.3at (Power over Ethernet 802.3at Type 2)
  
  
• IEEE 802.3u (100Base-TX Fast Ethernet)
  
  
• IEEE 802.3x (flow control, for full duplex mode)
  
  

General

• Supports:
  
  

- 10Base-T Cat3, 4, 5 UTP/STP RJ45

- 100Base-TX Cat5 UTP/STP RJ45

- 1000Base-T Cat5e UTP/STP RJ-45

• Packet filter / forwarding rate:
  
  

- 1.488.000pps (1000 Mbps)

- 148,800 pps (100 Mbps)

- 14,880 pps (10 Mbps)

• MAC address table: 8k
  
  
• Backplane speed: 52 Gbps
  
  
• Switch architecture: store and forward
  
  
• Configuration options:
  
  

- Port speeds: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation

- PoE on/off per port

- Flow control on/off per port

- VLAN

- Speed limitation (input speed and output rate)

- Port Mirroring

- Port Aggregation/LACP: 8 groups

- Broadcast Storm configuration with broadcast rate, multicast rate, and flooded unicast

- IGMP Snooping

- Quality of Service (QoS): port-based or DSCP

- Integrated VeriPHY cable diagnostics system

- Integrated ICMP Ping client sends ping requests to other network nodes

- SNMPv1/v2c (Simple Network Management Protocol)

- LAN settings (IP address, Gateway, etc. etc.)

• Certifications: FCC Class A, CE
  
  

LED

• PoE
  
  
• Power
  
  
• Activity/Connection
  
  

Power

• Input: 90 – 260 V AC, 50 – 60 Hz
  
  
• Power consumption: 260 Watts (maximum)
  
  

Environmental

• Metal housing
  
  
• Dimensions: 440 (D) x 208 (W) x 44 (H) mm
  
  
• Weight: 3.1 kg (6.8 lbs.)
  
  
• Operating temperature: 0 – 40°C
  
  
• Operating humidity: 10 – 90% RH, non-condensing
  
  
• Storage temperature: -20 – 70°C
  
  

Package contents

• Switch 24 Ports PoE+ Web-Managed Gigabit Ethernet with 2 SFP Ports
  
  
• Power cable
  
  
• User manual