Gigabit Ethernet Switch PoE+ 16 ports with 2 SFP ports - Intellinet I-SWHUB POE-983

• 
  
• Provides power and data to up to 16 PoE network devices
  
• Two slots for SFP (Small Form Factor Pluggable) modules of 1G
  
• Self-Healing Network: The Powered Device Monitor (PDM) function restarts any connected PoE device that is not responding or not sending network traffic
  
• PoE power budget of 250 watt
  
• Output power up to 30 watts per port
  
• Manual VLAN mode to isolate ports from 1 to 16 from each other, allowing them to communicate with SFP uplink ports 17 and 18
  
• Manual PoE extension mode (reduces network speed and extends PoE support to 250 m)
  
• PoE extension mode ideal for IP camera installations
  
• Fabric switch 36 Gbps
  
• Auto-sensing with automatic speed detection of ports 10/100/1000 Mbps
  
• Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE) specifications
  
• Green Ethernet energy-saving technology that disables unused ports and adjusts power levels based on cable length
  
• Saves installation costs by providing data and power over existing network cables
  
• Supports PoE devices compatible with IEEE 802.3at and IEEE 802.3af (e.g., wireless access points, VoIP phones, IP cameras)
  
• Supports IEEE 802.3at/af detection and protection against short circuit, overload, and high voltage
  
• Supports Auto-MDIX and NWay auto-negotiation on all RJ45 ports
  
• Supports jumbo frames up to 9216 Bytes
  
• Store and forward switching architecture
  
• Supports flow control 802.3x for full duplex mode and backpressure collision-based for half duplex mode
  
• Supports 8k MAC addresses with Auto-learning and Auto-aging
  
• Buffer memory of 4.1 Mbits
  
• Equipped with grounding to protect the equipment from external electrical surges
  
• ESD protection up to 8 kV (air) and 6 kV (contact)
  
• Two high-performance cooling fans to ensure perfect ventilation
  
• Includes 19 rack mounting brackets
  
• Fully NDAA compliant
  

Standard

• 
  
• IEEE 802.3 (Ethernet 10Base-T)
  
• IEEE 802.3ab (Gigabit Ethernet Twisted Pair)
  
• IEEE 802.3az (Energy Efficient Ethernet)
  
• IEEE 802.3af (Power over Ethernet 802.3at type 1)
  
• IEEE 802.3at (Power over Ethernet 802.3at type 2)
  
• IEEE 802.3u (100Base-TX Fast Ethernet)
  
• IEEE 802.3x (flow control for full duplex mode)
  

General

• 
  
• Media support:
  

- 10Base-T Cat5e UTP/STP RJ45, 8 pin
- 100Base-TX Cat5e UTP/STP RJ45, 8 pin
- 1000Base-T Cat5e UTP/STP RJ45, 8 pin

• 
  
• MAC address table: 8k
  
• Buffer memory: 4.1 Mbits
  
• Forwarding rate: 26,78 Mpps
  
• Backplane / switch speed: 36 Gbps
  
• Switch architecture: store and forward
  

Certifications:

• 
  
• FCC
  
• CE
  
• RoHS
  
• UKCA
  
• NDAA
  

Modes (selectable via sliding switch on the front panel)

• 
  
• Normal
  
• VLAN (port isolation)
  
• PoE Extend
  

LED

• 
  
• Power
  
• Link/Activity
  
• PoE
  

Output port pinout RJ45
- Pin 1: CC (+)
- Pin 2: CC (+)
- Pin 3: CC (-)
- Pin 6: CC (-)

Power

• 
  
• Input: 100.0 - 240.0 VAC, 50 - 60 Hz, internal power supply
  
• PoE power budget: 250.0 watt (maximum)
  
• Consumption: 260.0 W (maximum)
  

Physical information

• 
  
• Metal housing
  
• Dimensions (D x W x H): 207 x 440 x 44 mm
  
• Net weight: 2.44 kg
  
• Gross weight: 2.91 kg
  
• Operating temperature: from 0 to 40°C
  
• Storage temperature: -⁠40 to 70°C
  
• Operating humidity: 10 - 90% RH, non-condensing
  
• Storage humidity: 5 - 90% RH, non-condensing
  

Package contents

• 
  
• Gigabit Ethernet PoE+ Switch with 16 ports and 2 SFP ports
  
• Power cable
  
• Instructions
  
• Rack mounting brackets 19