The I-SWHUB IND-726 is an unmanaged gigabit Ethernet slim switch with 8 10/100/1000Base-T(X) ports. It supports redundant power input, is equipped with a robust IP-30 enclosure, and a DIP switch to enable or disable the relay alarm output. In addition, the wide operating temperature range from -40°C to 70°C can meet most requirements for various operating environmental conditions.
Features- Supports auto-negotiation and auto-MDI/MIDI-X
- Supports Jumbo Frame up to 9K Bytes
- Relay output for load capacity of 1A at 24 VDC
- Supports store-and-forward transmission
- Supports flow control
- Hardware DIP switch to enable/disable the alarm function
- Robust enclosure with IP-30 protection rating
- Allows wall or DIN rail mounting
Specifications - Ports: 8 10/100/1000Base-T(X) RJ45 ports with Auto MDI/MDIX
- Ethernet Standard:
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
- MAC Table: 2048 MAC addresses
- Process: Store-and-Forward
LED Indicators:
- Power indicator: green – Power LED x 2
- Error indicator: amber - indicates that an error has occurred on PWR1 or PWR2
- RJ45 10/100/1000Base-T(X) port indicator – green for Link / amber for 100Mbps indication
- DIP Switch 1: Power-1 error alarm: (ON) enable, (OFF) disable
- DIP Switch 2: Power-2 error alarm: (ON) enable, (OFF) disable
- Relay: relay output for load capacity of 1A at 24 V DC
- Redundant power input: dual DC input 12~48 VDC on 6-pin terminal block
- Power consumption (typical): 7 Watt
- Overcurrent protection: present
- Reverse polarity protection: present
- Housing: IP-30
- Dimensions (W x D x H): 26.1 x 94.9 x 144.3 mm
- Weight: 375 g
- Storage temperature: from -40 to 85°C
- Operating temperature: -40 to 70°C
- Operating humidity: 5% to 95% non-condensing
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent