Gigabit Ethernet Switch 16 PoE+ Ports Web Managed with 2 SFP Ports - Intellinet I-SWHUB POE-341

• Provides power and data connection for up to 16 PoE network devices
• Save installation costs by transferring data and power over existing network cables
• Self-Healing Network: The Powered Device Monitor (PDM) function restarts any connected PoE device that is not responding or not sending network traffic
• Compatible with Domotz for cloud management (may require firmware update)
• Automatic detection of optimal port speed 10/100/1000 Mbps
• Two slot compartments for GBIC (SFP) modules
• Compatible with IEEE 802.3at/af RJ45 PoE/PoE+ on output ports
• Output power up to 30 Watt per port (See Manual)*
• PoE with 220 watt
• Switch 36 Gbps
• Supports devices compatible with IEEE 802.3at and IEEE 802.3af (wireless access points, VoIP phones, IP cameras, etc.)
• Supports IEEE 802.3at/af detection and short circuit, overload and high voltage protection
• All RJ45 ports support Auto-MDIX and NWay auto-negotiation
• Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE) specifications
• IEEE 802.3az (Energy Efficient Ethernet EEE) can be disabled
• PoE Management - PoE port setting, priority, delayed power-on, scheduled PoE device restart and PoE device monitoring
• SNMP management and remote monitoring (RMON)
• SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9
• Dual protocol IPv4/v6
• Supports VLAN (tag-based and port-based)
• Provides IEEE 802.1x security protocol
• Supports link aggregation (trunking)
• Supports per-port bandwidth control
• Supports port mirroring
• Supports two types of QoS: port-based and DSCP
• Broadcast storm control with multicast packet rate settings
• 512 kBytes memory buffer
• Supports MAC address 8K
• Supports jumbo frames up to 9 kBytes
• Supports Rapid Spanning Tree / Spanning Tree protocols
• Store and forward switching architecture
• Operates in full/half duplex mode
• IEEE 802.3x flow control for full duplex mode
• Configuration via Web browser, Telnet or SSH
• Remote reboot/restart
• LEDs for power, link/activity, and PoE
• Two high-volume cooling fans ensure perfect ventilation
• Fully NDAA compliant

Standard

• IEEE 802.1d (Spanning Tree Protocol)
• IEEE 802.1p (traffic prioritization)
• IEEE 802.1q (VLAN Tagging)
• IEEE 802.1w (Rapid Spanning Tree Protocol)
• IEEE 802.3ad (Link Aggregation)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3ab (Gigabit Ethernet over Twisted Pair)
• IEEE 802.3ad (Link Aggregation Control Protocol LACP)
• IEEE 802.3az (Energy Efficient Ethernet EEE)
• IEEE 802.3af (Power over Ethernet 802.3at Type 1)
• IEEE 802.3at (Power over Ethernet 802.3at Type 2)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3x (flow control, for full duplex mode)

General features

• Supports:

- 10Base-T Cat3, 4, 5 UTP/STP RJ45

- 100Base-TX Cat5 UTP/STP RJ45

- 1000Base-T Cat5e UTP/STP RJ45

• Packet filter / forwarding rate:

- 1.488.000pps (1000 Mbps)

- 148,800 pps (100 Mbps)

- 14,880 pps (10 Mbps)

• MAC Address: 8k
• Memory buffer: 512 kBytes
• Backplane / switch speed: 36 Gbps
• Switch architecture: store and forward
• Configuration options:

- Port speeds: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation

- PoE on/off per port

- Maximum PoE per port

- PoE mode per port

- PoE port priority

- PoE port priority

- Flow control on/off per port

- VLAN

- Speed limitation (input speed and output rate)

- Port Mirroring

- Port isolation

- Port Aggregation/LACP: 8 groups

- Broadcast Storm configuration with broadcast rate, multicast rate, and flooded unicast rate

- Quality of Service (QoS): port-based or DSCP

- Link Layer Discovery Protocol (LLDP) - Connectivity discovery and access control

- Integrated ICMP Ping client sends ping requests to other network nodes

- SNMPv1 / v2c / v3 (Simple Network Management Protocol)

- RMON (1,2,3 & 9 groups)

- LAN settings (IP address, Gateway, etc.)

- SSHv2

- TACAS+

• Pinout of RJ45 output ports (data + power)

- IEEE Alternative B

   - Requires RJ45 network cable with 8 pins

   - Pin 1: Rx + (data reception)

   - Pin 2: Rx- (data reception)

   - Pin 3: Tx + (data transmission)

   - Pin 4: -Vdc_return (+) (power supply [+])

   - Pin 5: -Vdc_return (+) (power supply [+])

   - Pin 6: Tx (data transmission)

   - Pin 7: -Vdc (power supply [-])

   - Pin 8: -Vdc (power supply [-])

• Certifications: FCC Class A, CE mark

LED

• PoE
• Power
• Activity/Connection

Power

• Input: 100 – 240 V AC, 50 – 60 Hz
• Power consumption: 260 watt

Physical information

• Metal chassis
• Dimensions: 440 (D) x 208 (W) x 44 (H) [mm]
• Weight: 2.5 kg
• Operating temperature: 0 - 40°C
• Operating humidity: 10 – 90% non-condensing
• Storage temperature: -20 – 90°C

Package contents

• Switch 16 port Gigabit Ethernet PoE+ Web Managed with 2 SFP ports
• Power cable
• User manual
• Rack mounting brackets 19