- A RJ45 10/100/1000 port supports a maximum distance of 100 m
- Single-mode SC port connects distances up to 20 km
- Link Fault Pass Through (LFP) function to simplify network maintenance
- Supports an IEEE 802.3at and IEEE 802.3af compatible device (e.g., access points, VoIP phones, IP cameras, etc.)
- Provides output power up to 30 watts for a PoE-compatible device
- Supports full-duplex and half-duplex modes with auto-negotiation
- Status LED for power and connection/transmission for both ports
- Supports jumbo frames up to 9 kBytes
- Compact metal housing IP30
Standard- IEEE 802.3 / 802.3u / 802.3ab
- 10/100/1000Base-T
- IEEE 802.3at / 802.3af Power over Ethernet Plus (PoE+) standard
- EMC: FCC Part 15
General information - 1000Base-T: Cat5 UTP/STP, max. 100 m
- 1000Base-LX single-mode 8.3/125 µm, 8.7/125 µm, 8/125 µm or 10/125 µm
- Fiber cable: 20 km
- RJ45 cable: 100 m
· Connectors: - One 10/100/1000 Mbps RJ45 port, full/half duplex, MDI/MDI-X
- One 1000 Mbps Fiber (SC) port
- Pinout of RJ45 output ports (data + power)
- IEEE Alternative A
- Pin 1: [+ ]
- Pin 2: [+ ]
- Pin 3: [- ]
- Pin 4: unused
- Pin 5: unused
- Pin 6: [- ]
- Pin 7: unused
- Pin 8: unused
DIP switch description: - ON: LFP enabled
- OFF: LFP disabled
- ON: no function
- OFF: no function
- ON: limits RJ45 port to 10 Mbps
- OFF: sets RJ45 to Auto-negotiation 10/100/1000 Mbps
- ON: no function
- OFF: no function
LED- Power
- LINK/ACT for RJ45 port
- LINK/ACT for fiber port (SC)
- PoE+ indication
- Optical signal input LED
Power- Input voltage: 56 V DC
- Input current: 0.5 A
Physical information- Metal chassis
- Dimensions: 95 (D) x 70 (L) x 25 (H) [mm]
- Weight: 0.2 kg
- Operating temperature: from 0° to 55°C
- Operating humidity: 5 - 80% RH, non-condensing
- Storage temperature: from -10 to 70°C
Package contents- Media Converter Gigabit PoE+
- External power supply
- User manual
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent