- The 10/100/1000 Gigabit Ethernet media converter is designed to meet high-end network distribution requirements. It can extend a fast copper-based network via optical fiber cables up to 100 km (depending on the modules used).
- I-ET SX-MGBIC is compatible with IEEE 802.3, IEEE 802.3U, 10/100/1000Base-TX and 1000Base-FX standards.
- No configuration required. Operation status can be monitored locally via a set of diagnostic LEDs located on the front panel.
Standard- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3x (flow control, for full duplex mode)
- IEEE 802.3z (1000Base-SX/LX/LHX)
General - 10Base-T Cat3, 4, 5 UTP/STP RJ-45
- 100Base-TX Cat5 UTP/STP RJ-45
- 1000Base-T Cat5e UTP/STP RJ-45
- Fiber: dependent on mini-GBIC types
- 1 x RJ-45 Fast Ethernet
- TP cable: Cat. 5 UTP
- 1 x SFP mini-GBIC slots
- Fiber: 50/125, 62.5/125um multimode; 9/125, 10/125um single-mode
LED- PWR: Power LED (ON/OFF)
- FX: LED that detects the optical fiber signal (ON/OFF)
- FX-LINK/ACT: LED indicating fiber status (ON/Blink/OFF)
- 1000M: UTP port speed LED
- TX-LINK/ACT: LED indicating UTP port status (ON/Blink/OFF)
- FDX/COL: LED for UTP duplex port (ON = full duplex, OFF = half duplex)
Power- External transformer, Output 5 V 1 A input 110-265 V AC, 50/60 Hz
- Power consumption: 5 Watts (maximum)
Environmental features- Metal converter Dimensions: 40 x 110 x 140 mm
- Power supply Dimensions: 26 x 71 x 94 mm
- Operating temperature: 0 – 60°C
- Operating humidity: 5 – 90% RH, non-condensing
CertificationsPackage contents- 1 x Media Converter
- 1 x AC-DC Power Supply
- 1 x User Manual
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent